-- Copyright (C) 1991-2015 Altera Corporation. All rights reserved. -- Your use of Altera Corporation's design tools, logic functions -- and other software and tools, and its AMPP partner logic -- functions, and any output files from any of the foregoing -- (including device programming or simulation files), and any -- associated documentation or information are expressly subject -- to the terms and conditions of the Altera Program License -- Subscription Agreement, the Altera Quartus Prime License Agreement, -- the Altera MegaCore Function License Agreement, or other -- applicable license agreement, including, without limitation, -- that your use is for the sole purpose of programming logic -- devices manufactured by Altera and sold by Altera or its -- authorized distributors. Please refer to the applicable -- agreement for further details. -- -- This is a Quartus Prime output file. It is for reporting purposes only, and is -- not intended for use as a Quartus Prime input file. This file cannot be used -- to make Quartus Prime pin assignments - for instructions on how to make pin -- assignments, please see Quartus Prime help. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- NC : No Connect. This pin has no internal connection to the device. -- DNU : Do Not Use. This pin MUST NOT be connected. -- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.2V). -- VCCIO : Dedicated power pin, which MUST be connected to VCC -- of its bank. -- Bank 1: 2.5V -- Bank 2: 2.5V -- Bank 3: 2.5V -- Bank 4: 2.5V -- Bank 5: 2.5V -- Bank 6: 2.5V -- Bank 7: 2.5V -- Bank 8: 2.5V -- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND. -- It can also be used to report unused dedicated pins. The connection -- on the board for unused dedicated pins depends on whether this will -- be used in a future design. One example is device migration. When -- using device migration, refer to the device pin-tables. If it is a -- GND pin in the pin table or if it will not be used in a future design -- for another purpose the it MUST be connected to GND. If it is an unused -- dedicated pin, then it can be connected to a valid signal on the board -- (low, high, or toggling) if that signal is required for a different -- revision of the design. -- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins. -- This pin should be connected to GND. It may also be connected to a -- valid signal on the board (low, high, or toggling) if that signal -- is required for a different revision of the design. -- GND* : Unused I/O pin. Connect each pin marked GND* directly to GND -- or leave it unconnected. -- RESERVED : Unused I/O pin, which MUST be left unconnected. -- RESERVED_INPUT : Pin is tri-stated and should be connected to the board. -- RESERVED_INPUT_WITH_WEAK_PULLUP : Pin is tri-stated with internal weak pull-up resistor. -- RESERVED_INPUT_WITH_BUS_HOLD : Pin is tri-stated with bus-hold circuitry. -- RESERVED_OUTPUT_DRIVEN_HIGH : Pin is output driven high. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- Pin directions (input, output or bidir) are based on device operating in user mode. --------------------------------------------------------------------------------- Quartus Prime Version 15.1.1 Build 189 12/02/2015 SJ Lite Edition CHIP "lab3" ASSIGNED TO AN: EP4CE6E22C6 Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment ------------------------------------------------------------------------------------------------------------- RESERVED_INPUT_WITH_WEAK_PULLUP : 1 : : : : 1 : RESERVED_INPUT_WITH_WEAK_PULLUP : 2 : : : : 1 : RESERVED_INPUT_WITH_WEAK_PULLUP : 3 : : : : 1 : GND : 4 : gnd : : : : VCCINT : 5 : power : : 1.2V : : ~ALTERA_ASDO_DATA1~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 6 : input : 2.5 V : : 1 : N RESERVED_INPUT_WITH_WEAK_PULLUP : 7 : : : : 1 : ~ALTERA_FLASH_nCE_nCSO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 8 : input : 2.5 V : : 1 : N nSTATUS : 9 : : : : 1 : RESERVED_INPUT_WITH_WEAK_PULLUP : 10 : : : : 1 : RESERVED_INPUT_WITH_WEAK_PULLUP : 11 : : : : 1 : ~ALTERA_DCLK~ : 12 : output : 2.5 V : : 1 : N ~ALTERA_DATA0~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 13 : input : 2.5 V : : 1 : N nCONFIG : 14 : : : : 1 : TDI : 15 : input : : : 1 : TCK : 16 : input : : : 1 : VCCIO1 : 17 : power : : 2.5V : 1 : TMS : 18 : input : : : 1 : GND : 19 : gnd : : : : TDO : 20 : output : : : 1 : nCE : 21 : : : : 1 : GND : 22 : gnd : : : : GND+ : 23 : : : : 1 : GND+ : 24 : : : : 2 : GND+ : 25 : : : : 2 : VCCIO2 : 26 : power : : 2.5V : 2 : GND : 27 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 28 : : : : 2 : VCCINT : 29 : power : : 1.2V : : RESERVED_INPUT_WITH_WEAK_PULLUP : 30 : : : : 2 : RESERVED_INPUT_WITH_WEAK_PULLUP : 31 : : : : 2 : RESERVED_INPUT_WITH_WEAK_PULLUP : 32 : : : : 2 : RESERVED_INPUT_WITH_WEAK_PULLUP : 33 : : : : 2 : RESERVED_INPUT_WITH_WEAK_PULLUP : 34 : : : : 2 : VCCA1 : 35 : power : : 2.5V : : GNDA1 : 36 : gnd : : : : VCCD_PLL1 : 37 : power : : 1.2V : : RESERVED_INPUT_WITH_WEAK_PULLUP : 38 : : : : 3 : RESERVED_INPUT_WITH_WEAK_PULLUP : 39 : : : : 3 : VCCIO3 : 40 : power : : 2.5V : 3 : GND : 41 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 42 : : : : 3 : RESERVED_INPUT_WITH_WEAK_PULLUP : 43 : : : : 3 : RESERVED_INPUT_WITH_WEAK_PULLUP : 44 : : : : 3 : VCCINT : 45 : power : : 1.2V : : RESERVED_INPUT_WITH_WEAK_PULLUP : 46 : : : : 3 : VCCIO3 : 47 : power : : 2.5V : 3 : GND : 48 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 49 : : : : 3 : RESERVED_INPUT_WITH_WEAK_PULLUP : 50 : : : : 3 : RESERVED_INPUT_WITH_WEAK_PULLUP : 51 : : : : 3 : RESERVED_INPUT_WITH_WEAK_PULLUP : 52 : : : : 3 : inclk0_sig : 53 : input : 2.5 V : : 3 : N RESERVED_INPUT_WITH_WEAK_PULLUP : 54 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 55 : : : : 4 : VCCIO4 : 56 : power : : 2.5V : 4 : GND : 57 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 58 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 59 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 60 : : : : 4 : VCCINT : 61 : power : : 1.2V : : VCCIO4 : 62 : power : : 2.5V : 4 : GND : 63 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 64 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 65 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 66 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 67 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 68 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 69 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 70 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 71 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 72 : : : : 4 : RESERVED_INPUT_WITH_WEAK_PULLUP : 73 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 74 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 75 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 76 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 77 : : : : 5 : VCCINT : 78 : power : : 1.2V : : GND : 79 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 80 : : : : 5 : VCCIO5 : 81 : power : : 2.5V : 5 : GND : 82 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 83 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 84 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 85 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 86 : : : : 5 : RESERVED_INPUT_WITH_WEAK_PULLUP : 87 : : : : 5 : GND+ : 88 : : : : 5 : GND+ : 89 : : : : 5 : GND+ : 90 : : : : 6 : GND+ : 91 : : : : 6 : CONF_DONE : 92 : : : : 6 : VCCIO6 : 93 : power : : 2.5V : 6 : MSEL0 : 94 : : : : 6 : GND : 95 : gnd : : : : MSEL1 : 96 : : : : 6 : MSEL2 : 97 : : : : 6 : RESERVED_INPUT_WITH_WEAK_PULLUP : 98 : : : : 6 : RESERVED_INPUT_WITH_WEAK_PULLUP : 99 : : : : 6 : RESERVED_INPUT_WITH_WEAK_PULLUP : 100 : : : : 6 : ~ALTERA_nCEO~ / RESERVED_OUTPUT_OPEN_DRAIN : 101 : output : 2.5 V : : 6 : N VCCINT : 102 : power : : 1.2V : : RESERVED_INPUT_WITH_WEAK_PULLUP : 103 : : : : 6 : reset : 104 : input : 2.5 V : : 6 : N RESERVED_INPUT_WITH_WEAK_PULLUP : 105 : : : : 6 : RESERVED_INPUT_WITH_WEAK_PULLUP : 106 : : : : 6 : VCCA2 : 107 : power : : 2.5V : : GNDA2 : 108 : gnd : : : : VCCD_PLL2 : 109 : power : : 1.2V : : RESERVED_INPUT_WITH_WEAK_PULLUP : 110 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 111 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 112 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 113 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 114 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 115 : : : : 7 : VCCINT : 116 : power : : 1.2V : : VCCIO7 : 117 : power : : 2.5V : 7 : GND : 118 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 119 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 120 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 121 : : : : 7 : VCCIO7 : 122 : power : : 2.5V : 7 : GND : 123 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 124 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 125 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 126 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 127 : : : : 7 : RESERVED_INPUT_WITH_WEAK_PULLUP : 128 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 129 : : : : 8 : VCCIO8 : 130 : power : : 2.5V : 8 : GND : 131 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 132 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 133 : : : : 8 : VCCINT : 134 : power : : 1.2V : : RESERVED_INPUT_WITH_WEAK_PULLUP : 135 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 136 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 137 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 138 : : : : 8 : VCCIO8 : 139 : power : : 2.5V : 8 : GND : 140 : gnd : : : : RESERVED_INPUT_WITH_WEAK_PULLUP : 141 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 142 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 143 : : : : 8 : RESERVED_INPUT_WITH_WEAK_PULLUP : 144 : : : : 8 : GND : EPAD : : : : :