Irem Y. Tumer's Publications

(last update Fall 2005; see CV for complete list)

• Sorted by Date • Classified by Publication Type • Classified by Research Category •

Classified by Publication Type

• Journal • Book Chapter • Refereed Conference • Conference/Workshop • Educational Conference • Thesis •

Journal

• Toward Intelligent fault detection in turbine blades: Variational vibration models of damaged pinned-pinned beams. D. A. McAdams and I. Y. Tumer. ASME Journal of Vibration and Acoustics, 2005.
  Details     Download: (unavailable)
• Modeling variability in dynamic systems for vehicle health monitoring. D. A. McAdams and I. Y. Tumer. In review, 2005.
  Details     Download: (unavailable)
• Exploring Effective Methods for Simulating Damaged Structures with Geometric Variation. D. A. McAdams, D. Comella, and I. Y. Tumer. In review, 2005.
  Details     Download: (unavailable)
• Eigenfrequency analysis of aerodynamic variations in gas turbine engines. K. V. Ngo and I. Y. Tumer. In review, 2005.
  Details     Download: (unavailable)
• Application of function-failure similarity method to rotorcraft component design. R. A. Roberts, R. B. Stone, and I. Y. Tumer. In review, 2005.
  Details     Download: (unavailable)
• Linking product function to historical failures to improvefailure analysis in design. M. E. Stock, R. B. Stone, and I. Y. Tumer. Research in Engineering Design, 2005.
  Details     Download: (unavailable)
• The Function-Failure Design Method. R. B. Stone, I. Y. Tumer, M. VanWie, and M. Stock. ASME Journal of Mechanical Design, 2005.
  Details     Download: (unavailable)
• Decomposition-based failure mode identification method for reducingfailures and risks in large systems. R. B. Stone, I. Y. Tumer, and M. VanWie. In review, 2005.
  Details     Download: (unavailable)
• Development of a failure mode vocabulary and knowledge base to aid in conceptual design of spacecraft systems. S. J. Uder, R. B. Stone, and I. Y. Tumer. In review, 2005.
  Details     Download: (unavailable)
• Failure mode identification through clustering analysis. S. G. Arunajadai, S. J. Uder, R. B. Stone, and I. Y. Tumer. Quality and Reliability Engineering International Journal, 20:511–526, 2004.
  Details     Download: (unavailable)
• Mapping Function to Failure during High-Risk Component Development. I. Y. Tumer and R. B. Stone. Journal of Research in Engineering Design, 14:25–33, 2003.
  Details     Download: (unavailable)
• Analysis of Triaxial Vibration Data for Health Monitoring of Helicopter Gearboxes. I. Y. Tumer and E. M. Huff. ASME Journal of Vibration and Acoustics, 125(1):120–128, 2003.
  Details     Download: (unavailable)
• Analysis of Maneuvering Effects on Transmission Vibrations in an AH-1 Cobra Helicopter. E. M. Huff, I. Y. Tumer, E. Barszcz, M. Dzwonczyk, and J. McNames. Journal of the American Helicopter Society, 47(1):42–49, January 2002.
  Details     Download: (unavailable)
• On the Effects of Production and Maintenance Variations on Rotating Machinery Component Performance. I. Y. Tumer and E. M. Huff. Journal of Quality in Maintenance and Engineering, 8(3):226–238, 2002. (Highly Commended Award, 2002 Journal Volume, Emerald, Literati Club)
  Details     Download: (unavailable)
• Monitoring of Manufacturing Signals Using the Karhunen-Loève Transform. I. Y. Tumer, R. G. Longoria, and K. L. Wood. The ASME Journal of Offshore Mechanics and Arctic Engineering, 122(3):208–213, August 2000.
  Details     Download: (unavailable)
• A Mathematical Transform to Improve Part Surface Quality in Manufacturing. I. Y. Tumer, K. L. Wood, and I. J. Busch-Vishniac. The ASME Journal of Manufacturing Science and Engineering, 122(1):273–279, February 2000.
  Details     Download: (unavailable)
• Characterization of Surface Fault Patterns, with Application to a Layered Manufacturing Process. I. Y. Tumer, D. C. Thompson, R. H. Crawford, and K. L. Wood. The Journal of Manufacturing Systems, 17(1):23–36, 1998.
  Details     Download: (unavailable)
• Investigation of Characteristic Measures for the Analysis and Synthesis of Precision-Machined Surfaces. I. Y. Tumer, R. S. Srinivasan, and K. L. Wood. The Journal of Manufacturing Systems, 14(5):378–392, 1995.
  Details     Download: (unavailable)

Book Chapter

• Analysis and Synthesis of Engineering Surfaces to Bridge Manufacturing and Design. I. Y. Tumer, R. S. Srinivasan, and K. L. Wood. In Computer Aided and Integrated Manufacturing Systems Techniques and Applications, Manufacturing Systems Processes, pp. 1–45, CRC Press, 2001.
  Details     Download: (unavailable)

Refereed Conference

• Towards failure based decision making during design: user-centered design meets design methods research. F. Barrientos, E. Pedersen, and I. Y. Tumer. In SMC, Hawaii, 2005. In review
  Details     Download: (unavailable)
• Risk assessment practices at NASA: studies of design andreview methods. L. P. Chao, I. Y. Tumer, K. Ishii, and F. Barrientos. In ASME Design for Manufacturing Conference, Long Beach, CA, 2005. In review
  Details     Download: (unavailable)
• An Analysis of Risk and Function Information in Early Stage Design. K. Grantham, M. VanWie, R. Stone, I. Y. Tumer, and F. Barrientos. In ASME Design Theory and Methodology Conference, Long Beach, CA, 2005. In review
  Details     Download: (unavailable)
• Function-Based Risk Assessment: Mapping Function to Likelihood. K. Grantham, R. Stone, and I. Y. Tumer. In ASME Design Theory and Methodology Conference, Long Beach, CA, 2005. In review
  Details     Download: (unavailable)
• A new approach to probabilistic risk analysis in the early stages of concurrent and distributed design of aerospace systems. A. F. Mehr and I. Y. Tumer. In ASME Design Automation Conference, Long Beach, CA, 2005. In review
  Details     Download: (unavailable)
• A model knowledge base to enable concurrent performance optimization and failure avoidance. B. Mitchell, D. McAdams, R. Stone, and I. Y. Tumer. In ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, 2005. In review
  Details     Download: (unavailable)
• A new information exchange tool for capturing and communicating risks during early-phasedesign and concept evaluation. I. Y. Tumer, A. F. Mehr, F. Barrientos, and D. Ullman. In ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, 2005. In review
  Details     Download: (unavailable)
• Function-based design of a spacecraft power subsystem diagnostics testbed. I. Y. Tumer and R. Hutcheson. In ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, 2005. In review
  Details     Download: (unavailable)
• Towards Risk Based Design for NASA Missions: A Review of Practice and Research Trends at NASA. I. Y. Tumer, F. Barrientos, and A. F. Mehr. In ASME RSFP Conference, Long Beach, CA, 2005. In review
  Details     Download: (unavailable)
• Learning from failures: archiving and designing with failure and risk. M. VanWie, M. Bohm, R. Stone, I. Y. Tumer, and F. Barrientos. In Computer Aided Industrial Design and Conceptual Design Conference, Delft, Netherlands, May 2005.
  Details     Download: (unavailable)
• Design process error-proofing: engineering peer review lessons from NASA. L. P. Chao, I. Y. Tumer, and K. Ishii. In ASME Design for Manufacturing Conference, Salt Lake City, UT, September 2004.
  Details     Download: (unavailable)
• Failure prediction for unmanned spacecraft subsystem design. S. Uder, R. B. Stone, and I. Y. Tumer. In ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November 2004.
  Details     Download: (unavailable)
• Failure analysis in subsystem design for space missions. S. J. Uder, R. B. Stone, and I. Y. Tumer. In ASME Design Theory and Methodology Conference, Salt Lake City, UT, September 2004.
  Details     Download: (unavailable)
• Developing variational vibration models of damaged beams: toward intelligent failure detection. D. A. McAdams, D. Comella, and I. Y. Tumer. In ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 2003.
  Details     Download: (unavailable)
• Classification of aircraft maneuvers for fault detection. N. Oza, I. Y. Tumer, K. Tumer, and E. M. Huff. In Proceedings of the Fourth International Workshop on Multiple Classifier Systems (MCS), Surrey, Great Britain, July 2003.
  Details     Download: (unavailable)
• A function-based exploration of JPL's problem and failure reporting database. R. A. Roberts, I. Y. Tumer, R. B. Stone, and A.F. Brown. In ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 2003.
  Details     Download: (unavailable)
• Going back in time to improve design: The Elemental Function-Failure Design Method. M. E. Stock, R. B. Stone, and I. Y. Tumer. In Design Theory and Methodology Conference, ASME Design Engineering Technical Conferences, Chicago, IL, September 2003.
  Details     Download: (unavailable)
• Comparing two levels of functional detail for mapping historical failures: you are only as good as your knowledge base. M. E. Stock, R. B. Stone, and I. Y. Tumer. In ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., November 2003.
  Details     Download: (unavailable)
• Requirements for a failure mode taxonomy for use in conceptual design. I. Y. Tumer, R. B. Stone, and D. G. Bell. In International Conference on Engineering Design, Stockholm, Sweden, August 2003. Paper No. 1612
  Details     Download: (unavailable)
• A framework for creating a function-based design tool for failure mode identification. S. G. Arunajadai, R. B. Stone, and I. Y. Tumer. In ASME Design Theory and Methodology Conference. ASME Design Engineering Technical Conferences, Montreal, Canada, September 2002.
  Details     Download: (unavailable)
• A clustering-based approach for failure mode identification. S. G. Arunajadai, R. B. Stone, and I. Y. Tumer. In ASME International Mechanical Engineering Congress and Exposition, New Orleans, LA, November 2002.
  Details     Download: (unavailable)
• Towards failure modeling in complex dynamic systems: impact of design and manufacturing variations. D. A. McAdams and I. Y. Tumer. In ASME Design for Manufacturing Conference, Montreal, Canada, September 2002.
  Details     Download: (unavailable)
• Deriving function-failure similarity information for failure-free rotorcraft component design. R. A. Roberts, R. B. Stone, and I. Y. Tumer. In ASME Design for Manufacturing Conference, Montreal, Canada, September 2002.
  Details     Download: (unavailable)
• Towards failure-free design: reducing dimensionality in function-failure similarity analysis for large databases. I. Y. Tumer, R. B. Stone, and R. A. Roberts. In ASME International Mechanical Engineering Congress and Exposition, New Orleans, November 2002.
  Details     Download: (unavailable)
• Analytical method for mapping function to failure during high-risk component development. I. Y. Tumer and R. B. Stone. In ASME Design for Manufacturing Conference, Pittsburgh, PA, September 2001.
  Details     Download: (unavailable)
• Using triaxial accelerometer data for vibration monitoring of helicopter gearboxes. I. Y. Tumer and E. M. Huff. In ASME Mechanical Vibration and Noise Conference, ASME Design Engineering Techincal Conferences, Pittsburgh, PA, September 2001.
  Details     Download: (unavailable)
• Evaluating manufacturing and assembly errors in rotating machinery to enhance component performance. I. Y. Tumer and E. M. Huff. In ASME Design for Manufacturing Conference, Baltimore, MD, September 2000.
  Details     Download: (unavailable)
• Condition Monitoring Methodology in Manufacturing and Design. I. Y. Tumer, K. L. Wood, and I. J. Busch-Vishniac. In ASME Design for Manufacturing Conference, ASME Design Engineering Technical Conferences, Atlanta, GA, September 1998.
  Details     Download: (unavailable)
• Monitoring of Manufacturing Signals Using the Karhunen-Loève Transform. I. Y. Tumer, K. L. Wood, and I. J. Busch-Vishniac. In The Sixteenth Biennial Conference on Mechanical Vibration and Noise, ASME Design Engineering Technical Conferences, Sacramento, CA, September 1997.
  Details     Download: (unavailable)
• Improving Manufacturing Precision Using the Karhunen-Loeve Transform. I. Y. Tumer, K. L. Wood, and I. J. Busch-Vishniac. In The 1997 Design for Manufacturing Conference, ASME Design Engineering Technical Conferences, Sacramento, CA, September 1997.
  Details     Download: (unavailable)
• Characteristic Measures for the Representation of Manufactured Surfaces. I. Y. Tumer, R. S. Srinivasan, and K. L. Wood. In The 1996 Design for Manufacturing Conference, ASME Design Engineering Technical Conferences, Irvine, CA, August 1996.
  Details     Download: (unavailable)
• Fractal Precision Models of Lathe-Type Turning Machines. I. Y. Tumer, R. S. Srinivasan, K. L. Wood, and I. J. Busch-Vishniac. In The 1993 Design Automation Conference, ASME Design Engineering Technical Conferences, pp. 501–513, Albuquerque, NM, September 1993.
  Details     Download: (unavailable)

Conference/Workshop

• Design process error-proofing: Benchmarking of the NASA development cycle. L. P. Chao, I. Y. Tumer, and K. Ishii. In IEEE Aerospace Conference, Big Sky, MN, March 2005.
  Details     Download: (unavailable)
• Optimal design of integrated systems health management systems for improving safety in NASA's exploration vehicles: a two-level multidisciplinary approach. I. Y. Tumer and A. F. Mehr. In The Sixth World Congress on Structural and Multidisciplinary Optimization, Rio De Janeiro, Brazil, 2005. In review
  Details     Download: (unavailable)
• Function-based design paradigm for robust health monitoring. I. Y. Tumer and R. Hutcheson. In The Fifth International Workshop on Structural Health Monitoring, Stanford, CA, 2005. In review
  Details     Download: (unavailable)
• An open architecture for automated design and optimization of ISHM systems. I. Y. Tumer, E. Barszcz, P. Wysocki, and S. Uckun. In AFRL Integrated Systems Health Management Conference, Cincinnati, OH, 2005. In review
  Details     Download: (unavailable)
• Impact of variations on 1-D flow in gas turbine engines via MC simulations. K. V. Ngo and I. Y. Tumer. In IEEE Aerospace Conference, Big Sky, MT, March 2004.
  Details     Download: (unavailable)
• Principal components analysis of triaxial vibration data from helicopter transmissions. I. Y. Tumer and E. M. Huff. In 58th Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA, April 2002.
  Details     Download: (unavailable)
• An experimental comparison of transmission vibration responses from OH-58 and AH-1 helicopters. E. M. Huff, I. Y. Tumer, and M. Mosher. In American Helicopter Society 57th Annual Forum, Virginia Beach, VA, May 2001.
  Details     Download: (unavailable)
• Experimental analysis of mast lifting and mast bending forces on vibration patterns before and after pinion reinstallation in an OH-58 transmission test rig. E. M. Huff, I. Y. Tumer, E. Barszcz, D. Lewicki, and H. Decker. In American Helicopter Society 56th Annual Forum, Virginia Beach, VA, May 2000.
  Details     Download: (unavailable)
• Experimental analysis of steady-state maneuvering effects on transmission vibration patterns recorded in an AH-1 Cobra helicopter. E. M. Huff, E. Barszcz, I. Y. Tumer, M. Dzwonczyk, and J. McNames. In American Helicopter Society 56th Annual Forum, Virginia Beach, VA, May 2000.
  Details     Download: (unavailable)
• A survey of aircraft engine health monitoring systems. I. Y. Tumer and A. Bajwa. In The 1999 AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Los Angeles, CA, June 1999.
  Details     Download: (unavailable)
• Learning about how Aircraft Engines Work and Fail. I. Y. Tumer and A. Bajwa. In 1999 Joint Propulsion Conference, Los Angeles, CA, June 1999.
  Details     Download: (unavailable)
• An Overview of Tolerance Design for Function and Manufacturing Precision in Product Design. I. Y. Tumer and A. Bajwa. In 1998 NSF Design and Manufacturing Conference, Monterrey, Mexico, January 1998.
  Details     Download: (unavailable)
• Extraction of Fault Features on SLS Part Surfaces Using the Karhunen-Loeve Expansion Technique. I. Y. Tumer, K. L. Wood, and I. J. Busch-Vishniac. In Proceedings of the 1996 Solid Freeform Fabrication Symposium, pp. 575–585, Austin, TX, August 1996.
  Details     Download: (unavailable)
• Quantification of Part Surface Quality: Application to Selective Laser Sintering. I. Y. Tumer, D. C. Thompson, R. H. Crawford, and K. L. Wood. In 1996 World Automation Conference Proceedings, pp. 731–736, Montpellier, France, May 1996.
  Details     Download: (unavailable)
• Surface Characterization of Polycarbonate Parts in Selective Laser Sintering. I. Y. Tumer, D. C. Thompson, R. H. Crawford, and K. L. Wood. In Proceedings of the 1995 Solid Freeform Fabrication Symposium, pp. 181–188, Austin, TX, August 1995.
  Details     Download: (unavailable)
• Modeling of Dynamic Errors Caused by the Beam Delivery System in Selective Laser Sintering. I. Y. Tumer, I. J. Busch-Vishniac, and K. L. Wood. In Proceedings of the 1995 Solid Freeform Fabrication Symposium, pp. 353–361, Austin, TX, August 1995.
  Details     Download: (unavailable)
• Fractal-Based Tolerancing: Theory, Dynamic Process Modeling, Test Bed Development and Experiments. K. L. Wood, R. S. Srinivasan, I. Y. Tumer, and R. Cavin. In Proceedings of the 1993 NSF Design and Manufacturing Systems Conference, pp. 731–740, Charlotte, NC, September 1993.
  Details     Download: (unavailable)

Educational Conference

• Benefits of Team-Teaching for Doctoral Students Preparing for an Academic Career. I. Y. Tumer and L. F. Arthur . In 1998 ASEE Annual Conference, Seattle, WA, June 1998. Best paper award
  Details     Download: (unavailable)
• How to Establish an ASEE Student Chapter. E. Matsumoto, L. F. Arthur, I. Y. Tumer, and J. Gray. In 1997 ASEE Annual Conference, Milwaukee, WI, June 1997.
  Details     Download: (unavailable)
• Design of Work Jigs to Assist the Disabled in Sheltered Workshops in the Production of Sample Display Chains. R. Cavin, I. Y. Tumer, and M. W. Foohey. In Proceedings of the 1995 Rehab. Engineering Society of North America Conference (RESNA '95), pp. 725–727, Vancouver, BC, Canada, June 1995. (Winner of the Design Competition.)
  Details     Download: (unavailable)

Thesis

• Foundations of Condition Monitoring for Manufacturing and Design. I. Y. Tumer. Ph.D. Thesis, The University of Texas, Austin, Tx, 1998.
  Details     Download: (unavailable)

Generated by bib2html.pl (written by Patrick Riley ) on Wed May 11, 2005 17:23:01