Theses

  1. Ahmad, Alshehri, 2023, MS Thesis, Modeling of Non-Spherical Particle Dynamics in a Non-Uniform Flow , School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  2. Karra, Shashank, 2023, PhD Thesis, Turbulent Flows over Permeable and Impermeable Sediment Beds: Pore-resolved Simulations and Upscaled Modeling , School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  3. Jothi Vincent, Lokesh, 2023, MS Project, Modeling of Group Settling of a Dense Cluster of Particles Using the Corrected-Point-Particle Approach , School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR.

  4. Roberts, Kai, 2021, UHC BS Thesis, Direct Numerical Simulation of Anisotropic Particles in Turbulent Flow , School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  5. Pakseresht, P., 2020, Ph.D. Thesis, On the Euler-Lagrange Modeling of Particle-laden Turbulent Flows., School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  6. He, X, 2018, Ph.D. Thesis, Numerical Investigation of Unsteady Inertial and Turbulent Flows through Porous Media: Pore-scale DNS, Flow Analyses and Upscaling., School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  7. Choi, Y-J, 2018, Ph.D. Thesis, Numerical Investigations on Sewer Geysers., School of Civil and Construction Engineering, Oregon State University, Corvallis, OR. (PDF)

  8. Ghodke, Chaitrali, 2018, MS Project, Computational Fluid Dynamics Based Design of a Microchannel Based High Flux Solar Receiver, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR.

  9. Hauth, J, 2018, UHC Project (non-thesis), Oxycoal combustion based on reduced-order chemical kinetics of methane-oxygen as surrogate fuel, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR.

  10. Ghodke, Chaitanya, 2016, Ph.D. Thesis, DNS Study of Particle-Bed Turbulence Interactions in Oscillatory Flows, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  11. Rymal, C., 2014, MS. Thesis, Numerical Design of a High-Flux Microchannel Solar Receiver, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  12. Jackson, T., 2014, Ph.D. Thesis, Lateral Cavities in Streams: Flow Structure and Mean Residence Times from Channel Hydraulics, Morphology, and Computational Fluid Dynamics, Water Resources Engineering, Oregon State University, Corvallis, OR. (PDF)

  13. Skitka, J., 2013, MS. Thesis, Development of a Cartesian Grid Based Solver for an Oscillatory Boundary Layer Over a Rough Wall, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  14. Finn, J., 2013, Ph.D. Thesis, A Numerical Study of Inertial Flow Features in Moderate Reynolds Number Flow Through Packed Beds of Spheres, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  15. Sitts, L., 2012, UHC Thesis, Direct Numerical Simulation of a Low-Reynolds-Number Flat-Plate Airfoil with a Passively Actuated Trailing-Edge Flap, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  16. Cihonski, A., 2012, Ph.D. Thesis, Modeling and Simulation of Volume Displacement effects in Multiphase Flows, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  17. Drost, K. J., 2012, M.S. Thesis, RANS and LES predictions of turbulent scalar transport in dead zones of natural streams, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  18. Cihonski, A., 2010, M.S. Thesis, Investigation of volumetric coupling effects on particle-laden turbulent flows at dilute-to-moderate loadings, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  19. Drost, K., 2010, B.S. UHC Thesis, Direct numerical simulation of a flat wing with a movable front flap at high angles of attack and low Reynolds numbers, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  20. Eiler, B., 2010, M.S. Thesis, Microchannel steam reforming under constant and variable surface temperature profiles, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  21. Peterson, D., 2010, M.S. Thesis, Numerical simulation of micro/mini-channel based methane-steam reforming, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  22. Shams Sobhani, E., 2009, Numerical simulation of cavitating bubble-laden turbulent flows, Ph.D. Thesis, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  23. Finn, J., 2009, A multiscale modeling approach for bubble-vortex interactions in hydro-propulsion systems, M.S. Thesis, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  24. Martin, M., 2009, Numerical simulation of flow maldistribution in microchannels using fully resolved simulation, M.S. Thesis, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  25. Snider, S., 2008, Detection and analysis of separated flow induced vortical structures, M.S. Thesis, School of Mechanical Industrial and Manufacturing Engineering, Oregon State University, Corvallis, OR. (PDF)

  26. Apte, S.V., 2000, Unsteady flow evolution and combustion dynamics of homogeneous solid propellant in a rocket motor, Ph.D. Thesis, Department of Mechanical and Nuclear Engineering, Pennsylvania State University, University Park, PA.

  27. Apte, S.V., 1996, Numerical simulation of swirl flows in cyclone combustors, M.S. Thesis, Department of Mechanical Engineering, Indian Institute of Science, Bangalora, India.

  
 
©All rights reserved by the Apte Research Group.